The "FT JN" product line (FT JN1010 Hydrodynamic Spray®, FT JN1010®, FT JN1010 Formula E-Li™, and FT JN1010 Marine) is consistently marketed with a strong emphasis on environmental safety and the absence of harmful chemicals, particularly PFAS/PFOA. This directly addresses a major concern in the firefighting industry, especially in Queensland, Australia, where there are strict regulations and a phase-out of PFAS-containing foams.

Here's a breakdown of the safety standards implied or explicitly stated for each product, and how they relate to broader industry standards:

 

Common Safety Standards Across FT JN1010 Products:

 

1. PFAS-Free / Fluorine-Free: This is the most prominent safety feature across all products. PFAS (per- and poly-fluoroalkyl substances), including PFOA/PFOS, are persistent, bio-accumulative, and toxic chemicals. Many jurisdictions, including Queensland, have significantly restricted or banned their use in firefighting foams. Being PFAS-free is a critical safety and environmental advantage, aligning with current Australian regulations.

2. Plant-Based / Organic Ingredients: This implies a reduced environmental impact and lower toxicity compared to synthetic chemical-based alternatives.

3. Non-Toxic, Non-Hazardous, Biodegradable: These claims indicate that the products are designed to be safe for human contact, less harmful if released into the environment, and break down naturally without persistence.

4. Long Shelf Life: While not a "safety" standard in terms of immediate harm, a long shelf life (10-20 years) ensures the product remains effective and stable, preventing degradation that could lead to unexpected performance or hazardous byproducts.

 

Specific Safety Standards and Certifications Mentioned:

 

 

FT JN1010 Hydrodynamic Spray® (Portable Extinguisher)

 

• Multi-Class Protection (A, B, C, D, E, F): This indicates it has been tested and found effective for various fire types, including:

  • Class A: Ordinary combustibles (wood, paper, textiles)

  • Class B: Flammable liquids (petrol, oil)

  • Class C: Flammable gases (LPG, natural gas)

  • Class D: Combustible metals (magnesium, titanium)

  • Class E: Electrical fires (though typically referred to as Class C in Australia, "E" sometimes refers to energized electrical equipment)

  • Class F: Cooking oils and fats (kitchen fires)

  • The breadth of classes covered suggests a high level of versatility and testing.

• Compressed Air as Propellant: Eliminates the use of potentially harmful or environmentally damaging chemical propellants often found in traditional aerosols.

• "Safe to touch" and "non-toxic": These claims imply it has undergone dermatological and acute toxicity testing to ensure it's safe for incidental contact. However, standard safety advice to avoid eye contact or ingestion still applies.

• Can splits open without fragmenting, nor does it explode (under blowtorch test): This is a critical safety feature for a pressurized container, demonstrating that it's designed to fail safely rather than violently, reducing injury risk to users.

• Water soluble, easily disposed: Indicates that residues can be safely washed away and the product itself can be disposed of via normal methods without special hazardous waste procedures, due to its non-toxic and biodegradable nature.

 

FT JN1010® (Firefighting Foam Concentrate)

 

• EN & ICAO-Level B Standards: This is a key set of certifications for firefighting foams:

  • EN 1568 (Parts 1-4): European standards for foam concentrates used for extinguishing liquid fires. The mention of EN 1568-3:2008 (specifically for low expansion on hydrocarbon fires, proven successful against N-Heptane fires) indicates rigorous performance testing.

  • ICAO (International Civil Aviation Organization) Level B: This standard is crucial for airport firefighting foams, certifying their extinguishing performance and burn-back resistance for aviation fuel fires (e.g., jet A1 kerosene). Meeting Level B indicates a high level of performance for these critical applications.

• Compatible with existing FM-approved and UL-listed equipment: This speaks to its interoperability and safety within established firefighting systems.

  • FM Approved: Certification by Factory Mutual, indicating that products meet rigorous standards for quality, technical integrity, and performance.

  • UL Listed: Certification by Underwriters Laboratories, signifying that products have been tested and meet specific safety and performance standards.

• US EPA 3550C-2007 non-toxicity protocols: This explicitly confirms testing for non-toxicity and absence of PFOS/PFOA.

• Singapore Green Label: An environmental certification, reinforcing its eco-friendly claims.

• TUV Certified: TUV is a globally recognized certification body, lending credibility to its safety and performance claims.

 

FT JN1010 Formula E-Li™ (For Lithium-Ion Batteries)

 

• Specifically engineered for lithium-ion battery fires: This is a specialized safety feature. Lithium-ion battery fires are particularly challenging due to thermal runaway, potential for reignition, and off-gassing of toxic fumes. A solution specifically designed for this implies a different mode of action (e.g., rapid cooling, chemical stabilization) to mitigate these unique hazards.

• Rapid cooling action to quickly reduce heat and prevent re-ignition: Directly addresses the thermal runaway and reignition risks of lithium-ion batteries.

• Facilitates safe management and disposal of fire-damaged debris: This is a critical safety aspect for post-fire operations, as damaged lithium-ion batteries can still pose risks.

 

FT JN1010 Marine (For Marine and Offshore Environments)

 

• IMO-compliant (International Maritime Organization): This is a mandatory safety standard for firefighting equipment and foams used on vessels and offshore platforms. IMO standards (e.g., IMO MSC.1/Circ.1312) ensure the foam meets specific performance and environmental requirements for marine environments.

• Alcohol-resistant, fluorine-free: Important for Class B fires involving polar solvents, which can break down standard foams.

• Works effectively with both seawater and freshwater: Crucial for marine applications where water sources vary.

• Superior Vapor Suppression: A key safety feature for Class B fires, preventing hazardous vapor release and reducing explosion/re-ignition risks.

 

General Safety Considerations and Australian Context:

 

• Queensland Government Policy: The Queensland Government has a strong policy on the Environmental Management of Firefighting Foam, actively phasing out fluorinated foams. The FT JN products, being PFAS-free, are well-aligned with and supported by this policy. Users in Queensland would find these products beneficial for compliance.

• Safety Data Sheets (SDS): For all these products, a comprehensive SDS would be essential. It would provide detailed information on:

  • Chemical composition

  • Hazard identification

  • First-aid measures

  • Firefighting measures

  • Accidental release measures

  • Handling and storage

  • Exposure controls/personal protection

  • Physical and chemical properties

  • Stability and reactivity

  • Toxicological information

  • Ecological information

  • Disposal considerations

• Australian Standards (AS/NZS): While international standards (EN, ICAO, IMO, UL, FM) are mentioned, products sold in Australia would ideally also seek relevant Australian/New Zealand Standards (AS/NZS) certification for fire extinguishers (e.g., AS/NZS 1841 series for portable fire extinguishers) or foam concentrates, which ensures they meet local regulatory requirements for performance and safety. While not explicitly stated for all products, compatibility with UL and FM approved equipment suggests a high level of inherent quality that would likely facilitate local approvals.

In essence, the FT JN product line appears to prioritize environmental and human health safety by being PFAS-free and plant-based, while also demonstrating high performance through various international certifications relevant to their specific applications.